Step 1 To reboot the FWSM into the maintenance partition, enter the following command at the switch prompt: Router# hw-module module mod_num ...

For switch Sw1(config)#enable secret Sw1(config)#enable password Sw1(config)#line vty 0 15 Sw1(config-line)#password Sw1(config-line)#login Sw1(config-line)#line con 0 Sw1(config-line)#password For router Router(config)# enable secret Router(config)#enable secret Router(config)#line vty 0 4 Router(config-line)#password Router(config-line)#login Router(config-line)#line con 0 Router(config-line)#password For PIX PIX(config-line)#line con ...

Cisco Router Configuration Commands Requirement Cisco Command Set a console password to cisco Router(config)#line con 0 Router(config-line)#login Router(config-line)#password cisco Set a telnet password Router(config)#line vty 0 4 Router(config-line)#login Router(config-line)#password cisco Stop console timing out Router(config)#line con 0 Router(config-line)#exec-timeout 0 ...